Zen-Xero ACCELERATOR Safety Data
Zen-Xero Accelerator Safety Data =
#1 - SECTION 2: HAZARDS IDENTIFICATION
GHS Classification:
Physical Hazards: Flammable Liquids Category 3
Health Hazards: Acute Toxicity (Oral) Category 4
Specific Target Organ Toxicity (Single Exposure) Category 2 (Liver, Respiratory System) Specific Target Organ Toxicity (Single Exposure) Category 3 (Narcotic effects) Environmental Hazards: Hazardous to the aquatic environment (Acute) Category 3; (Chronic) Category 3
Hazard Pictogram:
Signal Word: Warning
Hazard Statements: H226: Flammable liquid and vapor
H302: Harmful if swallowed
H336: May cause drowsiness or dizziness
H371: May cause damage to organs (liver, respiratory system)
H412: Harmful to aquatic life with long lasting effects
#2. Precautionary Statements:
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P260: Do not breathe dust/fume/gas/mist/vapors/spray. May generate small amounts of
P264: Wash hands thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P273: Avoid release to the environment.
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor.
P330: Rinse mouth.
P370+P378: In case of fire: Use appropriate extinguishing media.
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P403+P235: Store in a well-ventilated place. Keep cool.
P501: Dispose of contents/container to an approved waste disposal plant.
#3. SECTION 4: FIRST AID MEASURES
If inhaled: Move the affected person to fresh air and keep them at rest in a position comfortable for breathing. If exposure or concern occurs, contact a physician.
If on skin or hair: Immediately remove all contaminated clothing. Rinse skin or hair with running water or shower. Wash with plenty of soap and water. If skin irritation occurs, get medical advice/attention. If exposure or concern occurs, contact a physician.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing. If exposure or concern occurs, contact a physician.
If swallowed: Immediately contact a physician. Rinse mouth. If exposure or concern occurs, contact a physician.
#4 and #5 - SECTION 7: HANDLING AND STORAGE
Handling technical measures: Implement equipment control measures as described in Section 8. Wear protective equipment. Ground the containers and install grounding devices. Use only non-sparking tools. Use explosion-proof electrical equipment, ventilation systems, and lighting. Take measures to prevent static discharge. Install local exhaust ventilation when vapors, fumes, or mists are likely to be generated. Install eye-wash and body-wash stations near the handling area.
Precautions for safe handling: Wear protective gloves, goggles, and face protection. Do not eat, drink, or smoke when using this product. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Store in a cool location. Avoid inhalation of dust, smoke, gas, mist, vapor, or spray.
Conditions for safe storage: Avoid contact: Refer to Section 10.
Safe storage conditions: Refer to Section 10. Store locked up. Store in a well-ventilated place in tightly closed containers.
6. SECTION 13: DISPOSAL CONSIDERATIONS
Residues: Before disposal, perform detoxification, stabilization, or neutralization to the extent possible to reduce the level of hazard. Entrust disposal of contents/containers to a licensed industrial waste disposal company approved by the prefectural governor.
Contaminated containers and packaging: Clean containers for recycling, or dispose of properly according to relevant laws and local government standards. Ensure all contents are completely removed before discarding empty containers. Exercise caution when incinerating, as this product contains flammable substances.
7. Direction for use.
To ensure proper bond, we recommend fully preparing all surfaces with a clay bar decontamination followed with Oberk Surface Prep for a clean surface, ready for clean bonding of coating product.
For painted surfaces, we highly recommend performing a polishing step to achieve the cleanest possible surface prior to installation. The surface should first be decontaminated using a clay bar or similar tool, followed by machine polishing. Once polishing is complete, clean and prepare the surface using Oberk Surface Prep and a clean microfiber towel.
Hand Application
Once the surface is cleaned, apply Zen-Xero Accelerator to the supplied applicator and apply evenly the painted surface.
We recommend doing each panel at a time, while a large panel like a hood or roof may require application to be done in 2-4 sections.
Once coating is applied to section evenly, look for indication by the product flashing with rainbow like look before lightly leveling and removing any additional residue.
After Accelerator is installer, the surface must cure for a minimum of 60 minutes before installer the Dynamix layer.
See Directions in next section for Zen-Xero “Dynamix”
For full SDS, please contact DavidPatterson@echeloncoatings-usa.com