Oberk x Echelon V3 Safety Data
V3 Safety Data =
#1 - SECTION 2: HAZARDS IDENTIFICATION
GHS Classification:
Physical Hazards: Flammable Liquid, Category 3
Health Hazards: Aspiration hazard, Category 1; Skin irritation, Category 2
Eye irritation, Category 2
Environmental Hazards: Hazardous to the aquatic environment (Acute) Category 3; (Chronic) Category 3
Hazard Pictogram:
Signal Word: Danger
Hazard Statements:
H226: Flammable liquid and vapor
H304:May be fatal if swallowed and enters airways
H315: Causes skin irritation
H319: Causes serious eye irritation
H336: May cause drowsiness or dizziness
H412: Harmful to aquatic life with long lasting effects
#2 - Precautionary Statements:
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261：Avoid breathing vapors.
P273：Avoid release to the environment.
P280：Wear protective gloves / eye protection.
P231+P232: Handle under inert gas. Protect from moisture.
P233: Keep container tightly closed.
P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor.
P331：Do NOT induce vomiting.
P302+P352：IF ON SKIN: Wash with plenty of water.
P305+P351+P338：IF IN EYES: Rinse cautiously with water.
P402+P404: Store in a dry place. Store in a closed container.
P403+P235: Store in a well-ventilated place. Keep cool.
3. SECTION 4: FIRST AID MEASURES
If inhaled: Move to fresh air and rest in a position comfortable for breathing. If exposure or concern occurs, contact a physician.
If on skin or hair: Immediately remove all contaminated clothing. Rinse skin thoroughly with running water or shower. Wash skin with plenty of soap and water. If skin irritation occurs, get medical advice/attention. Specific treatment is required. If exposure or concern occurs, contact a physician.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing. If eye irritation persists, get medical advice/attention. If exposure or concern occurs, contact a physician.
If swallowed: Rinse mouth. If you feel unwell, contact a physician. If exposure or concern occurs, contact a physician.
4 and 5. SECTION 7: HANDLING AND STORAGE
Technical measures: Implement equipment countermeasures as specified in Section 8. Wear protective equipment. Ground the container and take anti-static measures. Use non-sparking tools. Use explosion-proof electrical equipment, ventilation systems, and lighting. Take precautionary measures against static discharge. Install local exhaust ventilation where vapor, fume, or mist may occur. Install eye-wash and body-wash stations near the handling area. Precautions for safe handling: Wear protective gloves, safety goggles, and face protection.
Handle under inert gas to avoid moisture exposure. Do not eat, drink, or smoke while using this product. Wash hands thoroughly after handling. Use only outdoors or in well-ventilated areas. Store in a cool place. Avoid inhalation of dust, smoke, gas, mist, vapor, or spray. See Section 10 for incompatible materials. Conditions for safe storage: See Section 10. Store in a dry place or in tightly sealed containers. Keep locked up.
6. SECTION 13: DISPOSAL CONSIDERATIONS
Residues: Prior to disposal, neutralize, stabilize, or detoxify the material as much as possible to reduce its hazardous properties. Entrust the disposal of contents/containers to a licensed industrial waste disposal company approved by the prefectural governor. Contaminated containers and packaging: Clean containers for recycling, or dispose of properly according to local regulations. Ensure all contents are removed before discarding empty containers. Be cautious when incinerating, as the product contains flammable substances.
7. Direction for use.
To ensure proper bond, we recommend to fully prepare all surfaces with a clay bar decontamination followed with Oberk Surface Prep for a clean surface, ready for clean bonding of coating product.
For painted surfaces, we highly recommend performing a polishing step to achieve the cleanest possible surface prior to installation. The surface should first be decontaminated using a clay bar or similar tool, followed by machine polishing. Once polishing is complete, clean and prepare the surface using Oberk Surface Prep and a clean microfiber towel.
Hand Application
Once the surface is cleaned, apply Oberk X Echelon V3 to the supplied applicator and apply evenly the painted surface.
We recommend doing each panel at a time, while a large panel like a hood or roof may require application to be done in 2-4 sections.
Once coating is applied to section evenly, look for indication by the product flashing with rainbow like look before lightly leveling and removing any additional residue.
We recommend applying 2 layers of V3 for maximum coverage and durability prior to applying Echelon Hydrorepel.
Estimated durability of 1 coat is 12-18 months, while 2 coats average durability of 2-3 years.
HVLP application
Once the surface is cleaned, apply Oberk X Echelon V3 to the surface using an HVLP and apply it to the surface in a light even pattern.
Coating will flash and self-level to provide a finished product. Do not install Hydrorepel after HVLP application.
Professional Installers contact us for full SDS forms.